Resumen de contenidos para Truper Expert MADE-10NX
- Página 1 All manuals and user guides at all-guides.com 10 kg SDS MAX Joules Demolition hammer Impact energy MADE-10NX Applies for: Code Model 100891 MADE-10NX Read this manual thoroughly CAUTION before using the tool.
- Página 2 Parts Mounting and adjustments Keep this manual for future references. Start up The illustrations in this manual are for reference only. They might be different from the real tool. Maintenance Notes Authorized Service Centers Warranty Policy MADE-10NX ENGLISH...
- Página 3 All manuals and user guides at all-guides.com Technical Data MADE-10NX Code 100891 Description 10 kg SDS MAX Demolition hammer Chuck SDS max Voltage 127 V~ Frequency 60 Hz Corriente 14.5 A Power Impact energy 1500 W 25 Joules Weight 10 kg...
- Página 4 All manuals and user guides at all-guides.com General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 All manuals and user guides at all-guides.com Safety warnings for the use of Demolition Hammers Choose the appropriate drill or attachment While operating the demolition hammer CAUTION • The tool is designed to work with bits CAUTION • Hold the tool by its handle and by or accessories with SDS-max shanks.
- Página 6 All manuals and user guides at all-guides.com Parts Type D auxiliary SDS max Vibration Anti-skid handle Shank Chuck collar absorber handle protection Power trigger Ring for adjusting the required angle Speed adjustment knob Trigger off/switch continuous use Spare Carbon Maintenance Power Cord Brushes indicator...
- Página 7 All manuals and user guides at all-guides.com Mounting and Adjustments Mounting accessories CAUTION To prevent accidents, confirm that the switch is turned off and disconnect the plug from the power supply. Always wear gloves when changing accessories. WARNING They can become extremely hot during operation. •...
- Página 8 All manuals and user guides at all-guides.com Start Up Chisel angle adjustment • The chisel can be adjusted in 12 positions, depending on the job to be done. • Insert the chisel into the chuck as shown on page 7. •...
- Página 9 All manuals and user guides at all-guides.com Maintenance Cleaning and Care Lubrication • Clean the machine with a soft cloth, dampened with soap • The hammer drill crankshaft is lubricated with low and water, preferably after each use. viscosity grease so that it can be used for a long period of •...
- Página 10 All manuals and user guides at all-guides.com Notes ENGLISH...
- Página 11 All manuals and user guides at all-guides.com Authorized Service Centers In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center.
- Página 12 Model Brand 100891 MADE-10NX This product is guaranteed for 3 years. To make the warranty valid or purchase parts and components you must present the product in Corregidora 22, Col. Centro, Alc. Cuauhtémoc, CDMX C.P. 06060 or at the establishment where you purchased it, or at any Truper Service Center listed in the annex to the warranty ®...
- Página 13 All manuals and user guides at all-guides.com...
- Página 14 All manuals and user guides at all-guides.com...
- Página 15 All manuals and user guides at all-guides.com...
- Página 16 All manuals and user guides at all-guides.com...
- Página 17 All manuals and user guides at all-guides.com...
- Página 18 All manuals and user guides at all-guides.com...
- Página 19 All manuals and user guides at all-guides.com...
- Página 20 All manuals and user guides at all-guides.com...
- Página 21 All manuals and user guides at all-guides.com...
- Página 22 All manuals and user guides at all-guides.com...
- Página 23 All manuals and user guides at all-guides.com...
- Página 24 All manuals and user guides at all-guides.com...