Probuilder 18086 Manual De Instrucciones página 20

Fitting instruction
For hearing protectors over-the-head-type:
18086.
Fitting instructions
This model of hearing protectors is to be
worn over the head. When worn correctly,
the head band of the hearing protectors is to
rest on top of your head.
A. Pull the cups outward and place over
your ears so that the cushion fully
enclose the ears and seal tightly against
the head.
B. Adjust the height of each cup on both
sides while holding the headband down
until you have a tight and comfortable fi t.
20
C. The headband should sit straigh on the
head.
Cleaning and maintenance and
storage
Cushions should be wiped clean after each
use.
Cushions and foam pads should be cleaned
with mild soap and water or alcohol swabs
and allow to air dry.
It is recommended to check cushions and
foam pads at frequent intervals for cracking
and leakage as the may deteriorate with use.
Replace hearing protectors as and when
necessary.
Store in cool dry place in included container.
Do not leave in direct sunlight.
Note: This product may be adversely
aff ected by certain chemical substances.
Further information should be sought from
the manufacturer.