Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
1. Cup heating surface
2. Water tank
3. ON/OFF switch
4. Coffee/steam selector
5. START button
6. Filter holder
7. Locking lever
8. 1 coffee Filter
9. 2 coffees Filter
10. Measure spoon/presser
11. Steam tube
12. Grid
13. Drip tray
BEFORE FIRST USE
Remove all packaging material, stickers
and labels from the device, except the
appliance's rating plate.
Make sure that all components are
included. If any parts are missing or are
not in good condition, please contact the
Technical Assistance Service.
WARNING: Any dirt inside the filter holder
may compromise the quality of the coffee,
as well as cause the coffee to come out
unevenly through the filter holder's spouts.
Do not put any substance inside the filter
holder. If you detect coffee powder or any
substance inside the filter holder, rinse it
thoroughly under running water.
Remove the water tank and wash it. Follow
the instructions in the chapter "Filling the
water tank".
Filling the water tank
The water tank must be filled before starting
the machine.
To remove the water tank, hold the water
tank handle and pull it back slightly.
Fill the tank with water. Make sure the
water is between the Min and Max mark.
Replace the tank, making sure it fits snugly
into the back of the machine.
OPERATION
Priming the circuit
Fill the water tank. Do not exceed the MAX
mark.
Connect the appliance to the power outlet.
Switch on the ON/OFF button (I); the START
button blinks.
Keep the Coffee/steam selector in coffee
position. Do not rotate it. Put a container
right under the coffee outlet.
NOTE: DO NOT INSERT THE FILTER HOLDER
IN THIS OPERATION.
Press the START button, the machine will
start pumping a small amount of water
that will come out from the coffee shower.
Repeat it 2-3 times if no water comes out in
the first time.
Wait until the water stops pouring, then
the machine will enter preheating mode.
Rotate the Coffee/steam selector from
coffee position to middle position.
As soon as the START button stops
blinking, the machine will complete the
circuit priming and finish the preheating
automatically.
Carefully remove the container and pour
out the dispensed water.
English
17
Publicidad
