Safety Instructions - Velleman DVM630 Manual Del Usuario

Continuity

3. Safety Instructions

Read this manual thoroughly. Familiarize yourself with the functions
of the device before actually using it.
Only use the device for its intended purpose. Using the device in an
unauthorized way will void the warranty. Damage caused by
disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing
defects or problems.
WARNING: To avoid electrical shock always disconnect the test
leads prior to opening the housing. To prevent damage or injury,
only use batteries and fuses of the same type and ratings as
specified in this manual.
Remark: Refer to the warning on the back of the meter.
Keep the device away from children and unauthorized users.
Protect this device from shocks and abuse. Avoid brute force
when operating.
Avoid humidity, cold, heat, and large temperature fluctuations. When
the unit is moved from a cold to a warm location, leave it switched
off until it has reached room temperature. This to avoid condensation
and measuring errors. Ideal working environment is 73 °F ± 2 °F,
humidity 45-75 %.
This is an installation category CAT II 600V measuring
instrument. Never use this equipment in a higher category than
indicated. Refer to §4 Overvoltage/installation category.
Pollution degree 2 device. For indoor use only. Keep this device away
from rain, moisture, splashing and dripping liquids. Not for industrial
use. Refer to §5 Pollution degree.
For your safety, use only the test leads supplied with the
instrument. Before use, check that they are in good condition. Do not
use the meter or test leads if they look damaged. When damaged,
replace them with test leads of the same type and with the same
specifications.
Always place your fingers behind the protective edges of the test
probes while measuring!
Never touch free terminals when the meter is connected to a circuit.
V. 01 – 22/04/2013
DVM630
4 ©Velleman Inc.