UFESA BF5030 Manual De Instrucciones página 13

- fabrics (curtains, etc.) or loose materials, which may obstruct the ventilation grille; in addition, check
that the front part is free of volatile materials (dust, etc.).
The supporting surface must be stable, flat and even (so that the appliance does not tip over).
USE
Before each use check that the appliance is in good condition and that the electric cable is not
damaged; if the electric cable is damaged, it must be replaced by the manufacturer or by the technical
assistance service or, in the event, by a qualified technician, in order to avoid any type of danger.
Insert the plug into the mains socket.
Ventilation: Select the required speed by turning the speed selector using the following positions:
1 - Minimum speed 2 - Medium speed 3 - Maximum speed
To turn the fan off, turn the selector to the "0" position and then remove the plug from the mains
socket.
Timer: Use the timer to select the operating time. The timer can be selected up to 60 minutes. Once
the selected time is over, the appliance will stop working.
Oscillation of the grill: Turn the grill nut (5), to start or stop the rotation.
During long periods of inactivity, disconnect the plug from the mains socket.
MANITENANCE AND CLEANING
Warning: before carrying out the normal cleaning operations, remove the plug from the mains socket.
To clean the appliance, use a soft, slightly damp cloth; do not use abrasive or corrosive products.
Do not immerse any part of the fan in water or any other liquid: if this happens, do not immerse your
hand in the liquid and, first of all, remove the plug from the mains socket. Carefully dry the device and
check that all the electrical parts are dry as well: if in doubt, contact a qualified technician.
It is essential to keep the ventilation holes of the motor free of dust and fluff.
In case of long periods of non-use store the fan, protecting it from dust and moisture; we recommend
using the original packaging.
If you decide to stop using the appliance, it is advisable to render it non-operational by cutting the
power cable (first ensuring that the plug has been disconnected from the mains socket) and making
sure that parts which could be dangerous to children (e.g. the blade) may cause no harm.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU regarding electrical and
electronic devices, known as WEEE (Waste electrical and electronic equipment), which
establishes the applicable legal framework in the European Union regarding the
elimination and recycling of electrical and electronic devices. Do not put this product in
the bin. Take it to your closest electrical and electronic waste treatment centre.
13