Caliber HPA 605BT Manual página 5

1. SD CARD SLOT
supports up to 64 GB
2. USB SLOT
supports up to 64 GB
3. DISPLAY
4. MODE BUTTON / TWS BUTTON
switch between audio sources
Press and hold to enable TWS with a second
HPA605BT
5. PREVIOUS BUTTON / DECREASE VOLUME
6. NEXT BUTTON / INCREASE VOLUME
7. REPEAT BUTTON
repeat one, repeat all, random
8. PLAY / PAUSE BUTTON
9. INPUT 1 VOLUME BUTTON
Adjust the volume for MIC IN (13) or JACK IN
(11)
10. INPUT 2 VOLUME BUTTON
Adjust the volume for LINE IN (14) or RCA IN
(12)
11. 1/4" JACK INPUT
Mono input
12. RCA LINE INPUT
Stereo input
13. MIC INPUT 1
XLR MIC input
14. MIC INPUT 2
XLR MIC input
15. ECHO
Adjust the ECHO depth of the MIC input
16. MIC TREBLE
Adjust the treble tone of the MIC inputs
17. AUX IN
3,5mm jack input
18. MIC BASS
Adjust the bass tone of the MIC inputs
19. POWER AND CLIP LED
20. When the power is ON the green LED is lit
When the clip LED lights up, overload occurs
21. MAIN VOLUME BUTTON
Adjust the main volume
22. MIC PRIORITY
When active, the incoming MIC signal
reduces all other audio signals.
23. UHF MIC INPUT 1 VOLUME BUTTON
Adjust the volume for HPA605MIC1 IN
24. RF.1
Remote frequency 1 LED indicator
25. RF.2
Remote frequency 2 LED indicator
26. DC 12V INPUT
External battery input.
This is NOT for external speakers!
27. UHF MIC INPUT 2 VOLUME BUTTON
Adjust the volume for HPA605MIC2 IN
28. UHF POWER LED INDICATOR
Power is ON when lid
29. UHF POWER BUTTON
ON / OFF wireless frequency
30. MAIN POWER BUTTON
ON / OFF
31. AC INPUT
AC 110 - 230V, ~ 50 / 60Hz
32. CHARGING LED INDICATOR
Lit while charging