Descargar Imprimir esta página

Vonyx STM-7010 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CONTROLS
1. MICROPHONES
DJ/Mc have their own dedicated level control. microphones have individual 2 band eq section.
2. TALKOVER
There are talk over, MIC on and MIC off function. The Sound Pressure Level of audio from input sources will be
decreased while TALK OVER mode is set.
3. CHANNEL GAIN
This rotary control adjusts the input level.
4. AUX INPUT
Music can input the mixer with 3. 5mm audio line.
5. CHANNEL LEVEL FADERS
These are used to adjust the output level for each channel.
6. XF ASSIGN
Two of the XF ASSIGN knobs allows the mixing of one source into another in your unit is removable and can be
easily replaced if needed.
7. CHANNEL SELECTORS
These are used to switch between Line input and Phono、mic、USB input on each channel.
8. MASTER
This controls the overall output from the mixer, master output to the PA System.
9. DISPLAY
The unit has two LED displays Left output, Right output The left and right output display shows the
output level of the mixer.
10. USB IN/OUT
The USB jack can connect to PC.
11. BALANCE OUTPUT
The mixer support L/R balance output.
12. POWER
Power switch.
13. PHONES LEVEL
This controls the output volume of the headphones. Care should be taken not to have this set to high as
it could result in damage to both the hearing of the user and the headphones. The channel to be monitored is
selected via the cue assign control.
14. CUE SELECTOR
Select each channel of the CUE signal.
15. HEADPHONE
¼" jack headphone out.
16. POWER INPUT
Please ensure the correct voltage is selected for your country. Failure to set the correct voltage Will cause
damage to the unit.
17. RCA MASTER OUTPUTS
Left & Right line level Unbalanced RCA outputs.
18. BOOTH OUT
Line level Unbalanced BOOTH connectors.
19. REC OUT
Line level Unbalanced RCA connectors.
20. CHANNEL 4
Line5 input/mic3 JACKS.
21. CHANNEL 3
PH3/USB/Line4.
22. CHANNEL 2
PH2/AUX/line3.
23. CHANNEL 1
PH1-LN1/line2.
24. MIC1 AND MIC2 LEVEL
25. BOOTH OUT LEVEL
26. MASTER BALANCE CONTROL
Let you adjust master balance.
27. MASTER MONO/STEREO SELECTOR
Select mono mode or stereo mode.
28. BASS AND TREBLE CONTROLS
Lets you adjust the volume of high、mid、low Frequency on each channel.
29. HEADPHONE CUE/PGM CONTROL
Allow you to listen simultaneously or separately to the CUE material or the active program.
4

Publicidad

loading

Este manual también es adecuado para:

172.880