Firstech UM-FT-2W4B-LED Tarjeta De Inicio Rápido página 2

LEDS
EVENT
Runtime Remaining: 100%
Runtime Remaining: 75%
Runtime Remaining: 50%
Runtime Remaining: 25%.
All Command Confirmations
All Error Confirmations
Arming/Locking While Trigger
is Open
Valet Mode: If your remote start is not working, you may be in Valet Mode.
Your parking lights will also not flash. Your doors will still lock and unlock. To
exit Valet Mode, tap the Lock and Trunk buttons or turn the Ignition On and
then tap the foot brake 10 times or reprogram your remote(s).
To reprogram your remote first cycle the key in the ignition 5 times within 10
seconds. Parking lights will flash. After that tap the Lock button on your remote.
Repeat for any additional remotes. If you receive two parking light flashes, your
system has exited remote programming mode and you must retry.
Questions/comments? Contact us at 888-820-3690 from 8 AM to
5 PM PST. Register online at www.firstechllc.com within 10 days of
purchase to activate your new remote's warranty.
UM-FT-2W4B-LED _QuickCard 170913.indd 2
QUICK START CARD
REMOTE
LED
LEDS
DURATION
CHIRPS
6 Times
Once Every
5 Seconds
N/A
1 or 2 1 or 2
3 Times 3 Times
START ERROR CODES
PARKING LIGHT FLASHES
3 then 1 1: Motor running
3 then 2 2: Key in ignition on position
3: Door open
3 then 3
3 then 4 4: Trunk open
3 then 5 5: Foot brake on
3 then 6 6: Hood open
7: Reservation off
3 then 7
(manual transmission only)
3 then 8 8: Tach or voltage sensing failure
3 then 9 9: FT-DAS sensor shutdown
3 then 10 10: System is in Valet Mode
Download full user manuals
at compustar.com/user-manuals.
UM-FT-2W4B-LED
REMOTE START ERROR
(manual transmission only)
Firstech, LLC. | 2
2017/9/13 19:37:22