Turntable Installation
Coupling hub (lower part)
Glass Tray
Axis
Prior to Installation
Remove all packing material and accessories and
examine the oven for any damage such as dents or a
misaligned or broken door.
Installation
1. Choose a level surface that provides sufficient open
space for air intake and/or exhaust for ventilation.
30cm
LIBRE
20cm
20cm
A minimum clearance of 20 cm is required between the
oven and any adjacent wall. One side must be left free.
(1) Leave a minimum clearance of 30 cm above the oven.
(2) Do not remove the legs from the oven base.
Rotating ring assembly
a. Never place the glass tray with the top side down. The oven
should never be used without this tray.
b.Both the glass tray and the rotating ring must always be used
during cooking.
c.All food or containers containing food should always be placed
on the rotating glass tray.
d.If the glass tray or rotating ring is cracked or broken, contact
your nearest service center.
Cabinet: Remove all protective film from the cabinet surface. Do
not remove the light brown Mica lid attached inside the oven
cavity, as it serves to protect the magnetron valve.
(3) Blocking the air outlet/inlet openings may cause
damage to the oven.
(4) Locate the oven as far away from radios and TV sets
as possible.
(5) Plug the furnace into a normal household grounded
outlet. Make sure that the voltage and frequencies
correspond with the unit's marking on its labeling.
WARNING:
Do not install the oven over a range or stove or other
heat-producing appliance. If installed near or over a heat
source, the oven may be damaged and will void the
warranty.
English-7