VENTE-UNIQUE APOGON Guia De Instalacion página 4

Receive Your Bathtub
A) Unpack and check for damage
After receiving your bathtub, please unpack and remove all covering, checking whether there is any
damage. Repack the bathtub if it is not being immediately installed. It will be rejected any claim for
damage if not notified in a timely manner.
B) Protect your Bathtub
Before commencing installation, ensure the bathtub is completely protected, leave covering in place
until the bathroom is complete. Scratches and cracks incurred during installation are not covered by the
warranty.
Cleaning & Maintenance
A) To preserve the polished surface, after using your bathtub, clean with soft cloth and warm soapy
water to wash away any body oils or soap residue that forms a ring tide mark.
B) Do not use powders, pastes, crè me cleaners, thinners, window cleaning sprays or dry clean liquid,
etc.
C) When coloured essentials oils are used, first test that the colour won't stain your bathtub. Always add
oils into a bathtub full of water. Never pour them into an empty bathtub.
WARNING！ (apply to bath pre-fitted with waste)
The pre-fitted waste has NOT yet been fully installed.
Please use a qualified installer to secure it to the bath to avoid any water leaking.
Before use please test the bath to ensure the waste has been properly installed.
TOOLS REQUIRED
Wrench
Level ruler
Tape
Marking pencil
Silicone gel
3