Socket Mobile Charging Stand Manual De Instrucciones página 8

Two keyholes are provided on the Charging Stand base for
an optional installation on a wooden surface (screws and drill
template included).
1. Place the Charging Stand on the drill template and position
these in the desired location. Rotate the Charging Stand to align
with the solid notch (not the dotted notch) on the template.
2. Rotate the Stand/template combination so the Socket Mobile
logo faces the direction you want the scanner to aim.
3. Tape the template to the surface and remove the Charging
Stand.
3 / 32
4. Drill two
5. Tighten the two screws with about
exposed.
6. Place the Charging Stand on the
template aligned with the dotted
notch.
7. You can now tear away the template.
8. Twist the Charging Stand clockwise to
lock the screws in the
keyholes.
OPTIONAL TABLE MOUNTING
" holes through the drill marks on the template.
1 / 4
" of the screw head
Charging Stand Table Mount Drill Template
5 /
3
Lock
Insert
TOP VIEW
SCALE 1:1
"
16
3 /
2x DRILL DIA "
32
Leave space ~2 mm-4 mm
8