Ragalta RES-17000 Manual De Instrucciones página 5

Preparing the unit:
Start-up:
Note:
Before using the unit for the first time,
Carefully clean the unit and cover.
Do not use any aggressive detergents,
Brushes with metal or nylon bristles or
sharp objects such as knives or spatulas
for cleaning the unit. Avoid damaging the
non-stick coating. Always dry the unit
thoroughly after cleaning it.
Connecting the unit:
1. Connect the temperature regulator to the base of the basic
unit. Make sure that the plug is connected properly.
2. Set the temperature selector switch to heat level "0".
3. Connect the plug to a 110 V /60 Hz socket.
ATTENTION:
Do not use a multiple outlet strip or extension cable.