RAVAK H2O Color ML 1 Manual De Instrucciones página 16

1. Instructions for use
1.1 Functions and operation
Button
+
+
+
Safety features equipped with the system:
- The system automatically turns off if the keyboard hasn't been used for 120 minutes.
- If the temperature of the light fixture exceeds the manufacturer's specified value the control unit will limit
the maximum brightness in order to prevent damage to the light fixture. A double flash of the light fixture
signifies the activation of the brightness safety restriction. This double flash occurs immediately after bright-
ness safety restriction activation or on system start up.
The light fixture should not be used in an empty bathtub, water level must be above
the level of the light fixture during use. Water temperature should not exceed 40 °C.
Do not look directly into the light fixture when it is turned on.
Avoid abrupt changes in the light fixture temperature. Do not shower or pour excessively hot or cold wa
ter on the light fixture.
If the appliance is damaged, do not use it and disconnect it from the power supply.
GB
2
Press
1. press
2. press
hold
hold
hold
1. press
2. press
3. press
4. press
1. press
2. press
hold + press
hold + press
hold + press
System function
turns on the system (white light)
turns off the system
Moon Light
increases brightness
decreases brightness
colour cycle, 1min duration
colour cycle, 2min duration
colour cycle, 4min duration
white light
stop colour looping
continue colour looping
white colour temperature (+)
white colour temperature (-)
white colour temperature
(default setting)
Tab. 1: System functions overview