hillvert HT-LIGHT-100 Manual De Instrucciones página 22

d) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
e) Do not spray the unit with a stream of water or immerse it in water.
f) Perform regular inspections of the unit, checking technical fitness and any
damages.
g) Use a soft cloth for cleaning.
h) Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) as
these may damage the surface of the appliance material.
i) Do not clean the unit with acidic substances, medical products, diluents, fuel,
oil or other chemicals as this may cause damage to the device.
DISPOSAL OF WASTE APPLIANCES
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this appliance
are recyclable according to their marking. By reuse, recycling or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.
TROUBLESHOOTING
Problem
After connecting to
the power supply,
the device does not
work.
The limit switch does
not stop
machine's motor.
During operation,
the device generates
characteristic
sounds.
When connected to
the power supply,
the motor does not
start.
Possible cause
x
x
the
Worn guide rollers.
x
Action
Check the power supply at
the electrical outlet.
Disconnect and connect the
device.
Install the sensors on the
opposite sides.
Check the condition of the
guide rollers. Replace the
guide rollers.
Change the delay start time
setting to 1
Disconnect and connect the
device.
second.