Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE ALARM
1.
Press and hold ALM1 for a few seconds until the numbers blink.
2.
Use the HOUR and MINUTE buttons to set the alarm time.
Press ALM1 to confirm.
3.
Next, use the MIN/DAY or HOUR/MONTH buttons to select the days
4.
that the alarm goes off. Select from 3 pre-set day options:
• 1-5 Mon-Fri (weekdays)
• 1-7 Mon-Sun (every day)
• 6-7 Sat-Sun (weekend)
Press ALM1 again to confirm.
5.
6.
Now that the alarm time is set, press ALM1 to change the alarm
sound between Buzzer and Radio, or to disable it.
Alarm 2 is set using the same steps, using the ALM2 button instead of ALM1.
SNOOZING OR DISABLING THE ALARM
When the alarm sounds, you can press ALM OFF to turn the alarm off until
the next day. Or, you can press SNOOZE to pause the alarm for 9 minutes.
You can keep snoozing for up to 60 minutes.
LISTENING TO THE RADIO
Press the SOURCE button repeatedly until the LED display shows an
1.
FM or AM radio frequency.
2.
Tune the station frequency manually by pressing
3.
Press and hold
Stations with weaker signals may need to be tuned manually.
Adjust the volume at any time by pressing the VOL + and VOL - buttons.
TO SAVE AND RECALL RADIO STATION PRESETS
To save radio station presets, select the station to save from FM or AM
mode. Then, press and hold the MEM button. "P01" will blink on the
display. Press HOUR or MIN to choose the preset number to save to, then
press MEM again to confirm.
To recall saved radio station presets, press the MEM button from FM or
AM mode. The display will show "P01". Press MEM again to select the
next preset station. You can also use the
stations.
or
to seek for a higher or lower station.
–8–
or
or
to select preset
Publicidad
