Publicidad
Idiomas disponibles
Idiomas disponibles
Optional Accessory Usage
Part and Usage
GARMENT STEAMING CLOTH
Install the Garment Steaming Cloth / Lint Cloth / Microfiber Scrubbing
To steam a garment, place item of
Cloth over the Window Cleaning Tool.
clothing on a hanger and steam the
Make sure to attach the cloth to all hooks on the Cleaning Tool Frame
garment directly. Slowly slide the
to avoid slipping from the frame during use.
Garment Steamer Head vertically
over the garment to smooth the
fabric and remove wrinkles and
odors.
LINT CLOTH
Slowly pass over surface to be
cleaned. The absorbent Lint Cloth
picks up the dirt/hair loosened by
Tag
the steam.
MICROFIBER SCRUBBING CLOTH
Removes more dust and dirt with
less effort. Effective in cleaning
stubborn smudges or spills.
SCRAPER – RIGID BLADE
Remove the Squeegee Blade and slide the Scraper into the Window
1. Apply steam over the area that
Cleaning Tool with the grooved side of the Scraper facing shorter plastic
you plan to scrape. Repeat a few
teeth of the Window Cleaning Tool
times if needed.
2. Detach the Window Cleaning
Install the Coral Cloth or Garment Cloth to the Window Cleaning Tool
Tool with Scraper from the Exten-
with the Scraper and attach it to the Extension Hose.
sion Hose and start stripping off
the wallpaper or any hardened spills
(ketchup, syrup, etc.) from ceramic
or vinyl tiles, glass windows etc.
For removing wallpaper: Make "X"
shaped slits into the surface of the
wallpaper with utility knife to allow
steam to soften the adhesive.
LONG STEAM LAZER™
Attach the Long Steam Lazer™ to the Extension Hose by aligning the
lock button on the Extension Hose with the designated hole on the Long
Easier to clean hard to reach areas
(behind the cabinets, behind the
Steam Lazer™ tool and push until it locks in place.
toilet, far corners, etc.).
Attached to the Extension Hose, the Long Steam Lazer™ can be used
by itself or with the Bendable Jet Nozzle and/or Round Brush (Nylon).
Remove the end cap before installing the Bendable Jet Nozzle or Round
Brush (Nylon).
BENDABLE JET NOZZLE
Screw the Bendable Jet Nozzle onto the Long Steam Lazer™. Remove
Cleans tight corners and hidden
the black plastic cap from the top of the Long Steam Lazer™. Replace
places.
the plastic cap after attaching the Bendable Jet Nozzle.
ACCESSORY BAG
Keeps all accessories and small
parts in one place. Easy to view
the contents and easily locate the
needed tool or accessory and ac-
cess it.
11
Assembly
Tips/Caution
For garment steaming do not use
High Steam setting.
Some fabrics like leather, suede,
and velvet may not be suitable
for steaming. Please refer to the
manufacturer's label.
Curtains and draperies can be
steamed while hanging.
Black Tag
Do not use High Steam setting.
Do not use on animals.
back
side
If using for wallpaper removal:
Cover your floor to protect from any
water dripping. Cover the outlets
with electrical tape to protect from
any liquids.
Selection of the steam setting
will depend on the surface being
treated. If you are concerned about
possible drywall damage from the
steam, start with Low Steam set-
ting.
Handle with care as tools and ac-
cessories with sharp ends might
poke through the bag (Scraper,
Nozzle, etc.)
After Use
1. Press the Power Switch to OFF (O).
2. Unplug Power Supply Cord from the electrical outlet.
3. Make sure to remove the Mop Pad/Cloth before storage. Allow it to cool down before carefully removing the cloth.
4. Always empty the Water Tank at the end of each use.
5. Drain left-over water or steam before storing.
6. Wrap Power Supply Cord around Upper and Lower Cord Wrap.
7. Wipe all surfaces of the H2O™ HD Steam Cleaner with a soft cloth.
8. Store in a protected and dry area.
Filter
It is important to replace the water filter every three to four months or after approximately 20 to 25 uses as the filter becomes visibly dirty. The Water
Filter removes minerals and other impurities from tap water and also works to prevent water deposits from damaging your H2O™ HD Steam Cleaner.
To maximize the performance of your filter, distilled water may be used.
To replace the Water Filter, remove the Water Tank by pressing the Water Tank Release Button and pulling the Water Tank from both sides. With the
Water Tank removed, grab and lift the Water Filter from the Handheld Steamer and discard. Replace with a new Water Filter from Thane™. Replace
Water Tank and follow instructions for "How to use your H2O™ HD Steam Cleaner.
12
Publicidad
