Zizito TROY Manual De Instrucciones página 7

1
Press the pedal to the frame. Screw
and tighten the screws.
4
Insert the seat into the frame and
tighten it with hand.
7
Put the card in the force, then
insert the car and tighten it with the
hexagon.
10
Insert the push into the back.
Install complete. Check again, screw is tight, don't lose things!
INSTALLATION PROCEDURE
2
Insert the front wheel into the front
fork and fasten it with screws and
tighten it.
5
Put the cushion on the seat.
8
Insert the holder of the car and
fasten the card with a spring.
11
Put the knapsack on the casing of
the frame, push the button push
triangle and fix it with up and press
the card to the bottom sticky rope.
3
Fasten the rear wheel to the frame
and tighten it, then insert the fender
on the frame.
6
Insert the handrail into the hole in
both sides of the seat, twist the red
button with your hand and press it
with your thumb.
9
Fix the basket in the rear of the
frame and tighten it with a screw-
driver.
7