Singing Wood VP42AS Manual De Usuario página 7

Adjust the Counterweight
1. Release the tonearm clip, gently hold the tonearm and move it away from the
tonearm rest. At this point, the tonearm is unbalanced and free to swing.
2. Return the tonearm to the tonearm rest and lock the tonearm clip.
3. While holding the counterweight steady without any rotation, rotate carefully
only the tracking force dial until the "0" on the scale lines up with the
centerline marked along the top of the tonearm.
4. Rotate the counterweight including the tracking force dial counter-clockwise
(as seen from the front of the turntable) to adjust the pressure to the stylus
manufacturer recommendations.
5. Carefully rotate the Counterweight towards the front of the turntable until the
tonearm is horizontally balanced and hovers freely just above the platter
without the stylus touching the platter surface.
Remark:
- Each mark on the scale represents 0.05 g (gram).
- The recommended pressure for the factory-installed cartridge is 3.5 g+/-0.5g.
- The cartridge pressure goes up to 2g for one rotation of the tracking force dial.
Connecting the Included Speakers
1. Connect each speaker using the speaker wire to the turntable's speaker
output terminals and the speaker input terminals.
2. Make sure that the turntable's positive (red) terminal is connected to the
speaker positive (red) terminal. The turntable's negative (black) terminal is
connected to the speaker negative (black) terminal.
5