Descargar Imprimir esta página

Miniland dreambuddy pixie Manual Del Usuario página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
ENGLISH
TABLE OF CONTENTS
1. Introduction
2. What's included
3. Safety Instructions
4. Product features
5. Instructions for use
6. Maintenance
7. Identifying and solving problems
8. Remoovable module technical specifications
9. Information on disposal of batteries and product
1. INTRODUCTION
Congratulations for buying this product! dreambuddy
pixie is a friendly pixie who will help babies relax and
encourage them to bond with their parents. When your
child cries, it automatically plays soothing tunes to help
them fall into a deep sleep. Plus, mummies and daddies
can record and play their own voices. Your baby will feel
so secure hearing their favourite lullaby!
The heart-shaped sound module is sound-activated
and switches off automatically, plus its rechargeable
battery means you can take it anywhere.
Read the instructions in this manual carefully before
using the product. Keep it for future reference as it
contains important information.
The features described in this user guide are
subject to change without prior warning.
2. WHAT'S INCLUDED
1 soft toy
1 heart-shaped sound module
1 USB - micro USB charging cable
1 instruction manual and guarantee
· If any of these items are missing, please contact
your distributor.
3. SAFETY INSTRUCTIONS
Removable module
1. Keep the USB - micro USB charging cable (17) out
of children's reach.
WARNING
The charging cable is not a toy.
Do not use the removable module at high volume
and for long periods of time near the baby's ear to
prevent hearing damage.
Soft toy
1. This soft toy is safe for children to play with. It
complies with EU and USA toy safety standards.
2. Do not wash the soft toy with bleach or corrosive
detergents.
3. Do not place the soft toy close to fire.
WARNING
Always place the removable module inside the soft
toy and make sure the Velcro is firmly fastened
before giving it to your baby.
IMPORTANT:
please
and modifications performed on the device by
personnel not from the MINILAND technical service
are not covered by the product guarantee.
3.1 RECOMMENDED AGE
The recommended age for using this product is from 0
months to 3 years old.
4. PRODUCT FEATURES
4.1. DESCRIPTION OF PARTS (FIGURE 1)
A sweet little pixie who will help babies relax and
encourage them to bond with their loved ones.
1. pixie soft toy
2. pocket for holding the sound module
3. velcro strip for hanging anywhere
4. heart-shaped sound module
5. on/off switch
6. volume and blocking button
7. timer on/off switch
8. sound activation mode on/off switch
9. recording button
10. LED recording indicator
11. recording play button
12. soothing tunes play button
13. LED charging indicator
14. loudspeaker
15. microphone
16. micro USB charging port
17. USB - micro USB charging cable
5.INSTRUCTIONS FOR USE
5.1. SWITCHING THE REMOVABLE MODULE ON
AND OFF
The unit is switched on and off by sliding the on/off
switch (5) on the left side of the device to the ON (I) or
OFF (O) position. The module will make a sound when
it is activated or deactivated to indicate that it is working
or that it has been switched off.
NOTE: Do not forget to switch the removable module
off when not in use to preserve the battery for longer.
5.2. HOW TO CHARGE THE REMOVABLE MODULE
When the removable module is low on battery, the LED
charging indicator (13) will start to blink red.
To charge the device, connect the end of the charging
cable with the micro USB (17) to the micro USB port on
the module (16) and the other end to the energy supply.
While the device is charging the LED charging indicator
(13) will show red. When charging is complete, the light
will turn green.
5.3. DEVICE VOLUME CONTROL AND BLOCKING
The removable module has three sound volume
levels. To change the volume, just press the volume
control button (6) repeatedly until the desired volume
is reached.
To prevent the record and play buttons (9, 11 and 12)
being pressed when they are inside the little monster,
this module has a blocking function. To activate it,
just press the blocking button (6) for 3 seconds. Once
activated, the device will make a beep. From this
moment onwards, the buttons on the front cannot be
6
note
that
any
changes

Publicidad

loading