If the supply cord is damaged, it must be replaced by the manufacturer, its service
●
agent or similarly quali ed persons in order to avoid a hazard.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal
●
cutout, this appliance must not be supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly switched on and o by the utility.
WARNING: In order to avoid overheating, do not cover the heater.
●
The heater must not be located immediately below a socket-outlet.
●
Do not use this heater in the immediate surroundings of a bath, a shower or a
●
swimming pool.
CAUTION: This mobile heater is intended to be used mainly in workshops, craftsmen or
garages. Do not use in bathrooms.
It is important to connect the product to a properly sized socket because the product
●
has a high power.
3. INSTALLATION
WARNING:This portable heater is intended mainly to be used in workshops, light
industries or garages. Do not use it in bathrooms.
WARNING:Your heater shall be used as portable appliance only (thanks to respect all the
safety warnings given below).
Move the heater only by its handles.Never move the heater when it's working. Never let
the heater under the rain or under wet conditions.
Put the heater only on plane, clean & empty surface.
WARNING:Let a minimum distance of 1m between any side of your appliance and any
obstacle (furniture or walls, for example)
4. HOW TO USE
Plug the appliance to a 220-240V
contact a professional electrician for more details.
There is a 4 positions switch on your appliance: 0 (Stop) – Fan only - Fan & heating low
temperature - Fan & heating high temperature.
Turn the thermostat clockwise to increase the temperature.
5. CLEANING & MAINTENANCE
Switch o and unplug from the power supply before cleaning.
Using a soft, moist cloth, with or without a mild soap solution, carefully clean the exterior
surface of the product.
50-60Hz socket. If you are not sure, we advice you to
~
FR
ES
PT
IT
EL
PL
UA
RO
EN
37