Safco 4930 Instrucciones De Montaje

an LDI Company
New Hope, MN 55428
Visit us on the web:
www.safcoproducts.com
PARTS LIST
CODE DESCRIPTION
A Disk/Data Media Tray
Hardware Pack 4930-19NC
B Insert, Sheet of 10
Hardware Pack 4930-99NC
C Keys, Set of 2
D
Screw
E
Handle
F
Rubber Strip, 72"
1
Attach two E handles to each drawer front with
two screws each.
3
To add inserts to the A Disk/Data Media Trays,
gently slide a folded insert into the largest open-
ings of the Disk/Data Media Trays as shown.
4930-37MP: 1 of 3; Rev. 2
01/06
Computer Disk/Data Cabinet
A S S E M B L A S A S A S A S S E M B L S E M B L Y Y Y Y Y S E M B L S E M B L
TOOLS REQUIRED: Screwdriver
PRODUCT WARRANTY CARD is available online at: www.safcoproducts.com
QTY. PART NO.
24 4930-02BL
4
6 4930-35NC
1
1 4930-10NC
16 4930-23NC
8 4930-31CR
1 4939-32NC
E
A
For questions or concerns, please call the
available Monday-Friday 8:00 AM to 4:30 PM (Central Time) (English-speaking operators)
I N S T R U C T I O N S I N S T R U C T I O N S I N S T R U C T I O N S I N S T R U C T I O N S I N S T R U C T I O N S
2
If plastic inserts are needed, carefully separate
the B plastic inserts at the perforations as
shown below. Bend each end of the plastic
inserts up and lightly press into upright position.
B
4
For stacks of two or more, cut F Rubber Strips
to length, and position as shown. Tape the ends
down, and lower the second cabinet into place.
Safco Consumer Hot Line
4930
WARNING:
Do not fully extend
more than one
drawer at a time
to prevent
accidental tipping
F
RUBBER STRIPS TO
PREVENT SLIPPAGE
1-800-664-0042