Milwaukee 3100 Manual Del Operador página 5

OPERATION
To reduce the risk of injury, always
WARNING
wear proper eye protection marked
to comply with ANSI Z87.1.
When working in dusty situations, wear appro-
priate respiratory protection or use an OSHA
compliant dust extraction solution.
Surface Cutting
1. Clear debris from the path of the cart. Debris can
hinder or damage the wheel.
2. Arm the cut-off machine. Follow all instructions and
warnings provided with the cut-off machine.
3. Open the water supply line to the machine.
4. The cart uses a mechanical lever system to
engage the cut-off machine's trigger. To start the
cut-off machine, press the "1" button (1) while
pulling the throttle lever (2). The further the lever
is pulled, the faster the wheel will spin. Release
lever to stop.
2
5. Allow machine to come to full speed before con-
tacting work surface.
6. Slowly lower depth adjustment handle (3) to enter
the cut. Insert the wheel into the work surface only
to the depth necessary to make the desired cut.
3
7. Once depth of cut is set, return both hands to the
push handle.
8. Slowly push the cart forward in a straight line.
WARNING! Be wary of kickback forces, flexing of
the wheel, or contact with foreign objects; these
can cause the operator to lose control of the cart
and/or the wheel to shatter. Monitor the water
supply during use.
9. To stop the cut-off machine, release the throttle
lever. Allow wheel to come to a complete stop
before removing wheel from the cut.
10. Close the water supply line to the machine.
11. Raise depth adjustment handle to move the wheel
above work surface.
WARNING
sories before performing any maintenance.
Contact a MILWAUKEE service facility for ALL
repairs.
Start a regular maintenance program to keep your
cart in good repair. Inspect your cart for issues
such as undue noise, misalignment or binding of
moving parts, breakage of parts, or any other condi-
tion that may affect the operation. Return cart to a
MILWAUKEE service facility for repair.
Keep handles clean, dry and free of oil or grease.
Use only mild soap and a damp cloth to clean, since
certain cleaning agents and solvents are harmful to
plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia
1
and household detergents containing ammonia.
Never use flammable or combustible solvents around
machines.
Remove battery from machine and water from tank
before storing. The push handle can be folded for-
ward for compact storage.
For repairs, return the cart to the nearest service
center.
WARNING
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
M18
The cart is compatible with MILWAUKEE M18
Switch Tank 4-gallon Backpack Water Supply Kit
(2820-21WS).
1. Remove the 3-gallon water supply tank mount from
cart stem by removing the two bolts (1).
2. Install the M18
stem using the same two bolts (2).
3. Remove the sprayer waist straps and place the
sprayer onto the mounting bar.
5
MAINTENANCE
To reduce the risk of injury, always
remove the machine and all acces-
Maintaining Cart
Cleaning
Storage
Repairs
ACCESSORIES
Use only recommended accesso-
ries. Others may be hazardous.
Switch Tank Compatibility
TM
Sprayer mounting bar to cart
TM
1
TM
2