AUX CL93390 Manual De Instalación página 19

Configure the Devices
After the control software is downloaded and installed on the
mobile terminal, configure the AC devices according to the
following figure.
<
Device List
Add device
1
Activate the control
software and click
"Add device"within
30 minutes after the
WIFI module is reset.
Note: 1.In the case of first time configuration or after the connected wireless router
or access point is changed, make sure the mobile terminal is already
connected to the wireless router or access point to be paired with the
WI-FI module.
2.If the configuration is failed, press "Config faild check items" to check the
notes about the failure before reconfigure the AC.
After the configuration is successful, click the corresponding
AC name to enter the control interface for further operation.
<
Add device
Add a new device to the WIFI net work
xxxxx
WIFI name:
passward:
show password
2
<<Config failed check items>>
Start the configuration
3
the WI-FI name will
automatically appear in
"Wi-Fi name". Enter the
password of the Wi-Fi
and click "Start the
configuration".
Figure 11
19
Device List
Air-conditioner
4
Add device
Once the configuration
is complete, the
"Device List" interface
will be automatically
returned to and the
configured the AC can
be seen.
EN