Publicidad
Idiomas disponibles
Idiomas disponibles
2
Safety instructions
This section gives important notices for safe use of the product. These notices are to protect employees
and to ensure safe, fault-free operation. Warnings relating to use can be found in the corresponding
instructions for use.
The product is built in accordance with the state of the art and the recognised technical rules.
DENIOS guarantees electrical conductivity in accordance with the standards for the product at the time of
delivery.
There may be hazards associated with the product if it is used, maintained or repaired in an incorrect
manner, not in accordance with the intended use or by untrained personnel.
Hazards may arise affecting:
g
Health and life of personnel
g
Product and other assets near the product
Follow all the safety instructions in these operating instructions as well as all safety instructions in the
operating instructions of our suppliers which have been provided.
All employees who are to work with this product must confirm by signature that they have read and
understood these operating instructions completely.
Observe the following safety instructions for use in Ex zones:
g
During the handling, storage and dispensing of substances which can create an explosive atmo-
sphere, the requirements of ATEX Directive 1999/92/EC must be observed. Depending on each Ex
zone, you must take measures to prevent the ignition of an explosive atmosphere in each individual
case.
g
Use suitable techniques to avoid sources of thermal ignition, for example friction, lightning, open
flames, open lights and smoking.
g
Avoid mechanically produced sparks by using suitable tooling, suitable transport and loading equip-
ment.
g
Avoid exceeding the permitted electrical conductivity values which are set out in the standards.
These values can change depending on the depositing of hindering substances and also by chemical
and mechanical influences. In particular, dust, dirt, paint, acids and alkalis can reduce or completely
prevent the conduction of electrical/electrostatic energy to the floor.
2.1
Intended use
Only operate the product in a fault-free condition.
276267_GSN_Operating-instr_002_INT
32/100
Safety instructions
Publicidad
