Publicidad
Step 10
Step
NOTE: The UPPER GUIDE (5) tabs should be down before starting this step.
å
Insert the LOWER GUIDES (6) in the DOOR (J) at an angle into the groove in the BOTTOM (F). Then, tilt
å
the DOOR (J) up vertically. Push the UPPER GUIDE (5) tabs up into the groove in the TOP (A).
NOTE: The DOOR should slide freely in the track.
å
NOTE: The DOOR gap is adjustable. Turn the cam on the LOWER GUIDES (6) with a
å
STRAIGHT EDGE SCREWDRIVER to adjust the door up or down.
The tab should
be down before
you insert it into
the upper track.
The tab should
be up after the
DOOR is in place.
A
J
F
F
A
J
A
J
F
6
Turn this
cam to
adjust the
door gap.
Publicidad
