Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TROUBLESHOOTING
FAULT
CAUSE
No power supply
No connection or loose connection
to the drives
No connection to the
hand-switch
DESK DOES
Max. lifting capacity is exceeded
NOT MOVE
Max. time limit exceeded
Defective drive
Defective control unit
Hand set is defective
Controller expects a
DESK LOWERS
SLOWLY
re-initialization
DESK OPERATES
Max. lifting capacity is exceeded
SLOWLY
No connection or loose connection
DESK MOVES ON
to the drives
ONE SIDE ONLY
BRIEFLY THEN
STOPS
Defective drive
DATA
Input Voltage
Output Voltage
Anti Collision
Ambient temperature during operation
Travel from software
Permissible relative humidity (for operation)
Number of actuator controlled
Flammability Rating
Max. operating time
Nominal lift speed of the drive columns
Certification
08 –
REPAIR
Plug in mains cable; If applicable,
check the plug connector on the controller
Check if plug connection from the motor cable
to the controller box and the drives is secure
Check connection of handset to control unit is secure
Reduce weight or load on the desktop
Control is activated automatically
(1 min use/9 min non operation)
Contact customer services
Contact customer services
Replace handset
See control box reset instructions on page 07
Reduce weight or load on the desktop
Check if plug connection from the motor cable to the controller
box and the drives is secure
Contact customer services
AC100-240v / 50-60 Hz
8A
Yes (GYRO)
+5
C - +40
C
o
o
600mm stroke
20-80% (non-condensing)
2
UL94-V0
10% (1min. On/9min. off)
36mm/s
UL, CE
CE DECLARATION OF CONFORMITY
For the purposes of the EC Machinery Directive 2006/42/EC, Annex II,
We hereby declare that the device identified below, in the version supplied to the market by us,
complies with the EC directives listed below. In the event of a modification or improper use, that
has not been agreed with us, this declaration shall become invalid.
The Senator Group
Altham Business Park, Sykeside Drive,
Accrington BB5 5YEP
Declares that the following product:
Workbase Height Adjustable
Description - An electric desk that has a single or two independent height adjustable tops.
This includes variations and optional equipment referred to in the price list.
Meets the following EC-Directives and Standards:
Directives
• Machinery Directive 2006/42/EC
• EC Low Voltage Directive – 2014/35/EU
• EC Directive Electromagnetic Compatibility
(EMC) - 2014/30/EU
• EC RoHS Directive - 2011/65/EU
Standards
• BS EN ISO 9241-5: 1999
• BS EN 527-1: 2011
• BS EN 527-2: 2016 + A1: 2019
The current version of the standard on the date of issue shall always apply.
This documents must not be made available to third parties without the permission by the
person responsible for the release of documents.
Authorised documentation representative.
Tim Cockerill, Design Engineer
This declaration document was authorised and signed digitally by:
Kirk Marsden, Product Development Manager
User Guide
– 09
Publicidad
