Publicidad
Idiomas disponibles
Idiomas disponibles
Hardware Assembly
Step 2:
Remove the link nut
(D) from the end of the
down post (C). Insert
the conical connector
of the down post to
the
headrest hardware (E).
Ultra Headrest Hardware shown
mounted on a Quick Clean Release (QCR)
stem. A UniLink QCR stem is required.
Step 3:
Replace the link nut (D), M5 washer (B)
and M5 x 0.8 x 25mm socket head
screw (A) into the assembly and
tighten the screw to secure the
headrest hardware into position.
EN
Step 1:
Remove the M5 x 0.8 x 25mm socket head
screw (A) and M5 washer (B) from the
mount on the end of the down post (C).
link
on
A
B
D
the
E
Installation
C
2
Publicidad
