Publicidad
Idiomas disponibles
Idiomas disponibles
EN
10.3 STAND THE MACHINE ON END
24
1. Remove the grass catcher.
2. Pull and turn the handle knobs 90°.
3. Fold down the handle.
4. Turn the handle knobs 90° to lock the handle into
position.
5. Stand the machine on end and make sure that the
brackets touch the floor.
Storage Switch
The machine has a storage switch (24) that prevents its
startup in the storage position.
It is necessary to remove the safety key and the battery
pack to prevent accidental startup or unapproved use.
The storage switch does not replace this function.
11
TROUBLESHOOTING
Problem
The handle is
not in position.
Possible cause
Solution
The bolts are not
Adjust the height
engaged correct-
of the handle
ly.
and make sure
that the knobs
and bolts are
aligned correctly.
English
Problem
The machine
does not start.
The machine
cuts grass un-
evenly.
The machine
does not mulch
correctly.
The machine is
hard to push.
There is a high
vibration in the
machine.
14
Possible cause
Solution
The battery ca-
Charge the bat-
pacity is low.
tery pack.
The blade bail
Replace the
lever is defec-
blade bail lever.
tive.
The safety key is
Put in the safety
not put in.
key.
The lawn is
Examine the
rough.
mowing area.
The blade height
Adjust the blade/
is not set cor-
cutting height to
rectly.
a higher position.
Wet grass clip-
Wait until the
pings attach to
grass dries be-
the deck.
fore mowing.
The mulch plug
Install the mulch
is missing.
plug.
The grass is too
Increase the
tall, or the blade
blade/cutting
height is too low.
height.
The grass catch-
Empty the grass
er and the blade
clippings from
drags in thick
the grass catch-
grass.
er.
The blade is un-
Replace the
balanced and
blade.
worn.
The motor shaft
1. Stop the mo-
is bent.
tor.
2. Remove the
safety key
and battery
pack.
3. Inspect for
damage.
4. Repair the
machine be-
fore you start
it again.
Publicidad
