adia Test Strip
Caution
1. Store the adia test strip vials in a cool, dry place. Keep out of direct sunlight.
Do not freeze.
2. Store test strips in their original vial only. Do not mix the test strips in new
vials or in any other container.
3. Immediately replace the vial cap and close tightly after removing any test
strips from the vial.
4. Make a note of the expiry date, which is six months from the date you first
open a new vial of test strips. Throw adia test strips and vial away after the
expiry date.
5. Do not use the test strips after the expiration date printed on the package
or vial, since it may cause inaccurate results.
6. adia test strips should be single use only. DO NOT RE-USE.
7. Do not test at temperatures below 10 °C (50 °F) or above 40 °C (104 °F).
8. Do not test in the condition that humidity is below 10 % or above 90 %.
9. Do not bend, cut, or alter the test strip.
10. Avoid getting dirt, food, and water on the test strip. Don´t touch the strips
with wet hands.
11. Avoid getting dirt, food, and water on the color-coding label (backside of
test strip).
12. Refer to additional information in the adia test strip package.
Test Strip Port
Contact Bar
Warning
To reduce the chance of infection:
1. Lancing device and lancets should NOT be shared with others.
2. Always use a new lancet and a new blood glucose test strip.
3. Practice using the lancing device and become accustomed with its use.
4. Lancets and blood glucose test strips should be single use only.
5. Wash your hands in warm clean running water using soap before testing.
6. Avoid getting hand lotion, oils, dirt or debris on the lancets or on the
lancing device.
7. Dry your hands completely before testing.