INSTALLATION OF APPLIANCE
Take off and remove all packaging materials and adhesive tapes from the cooking
compartment and the door before operating the appliance.
Carefully read the installation pages for the installation of the accessories.
The installation dimensions to be used for all installation types of the appliance are
provided in Fig. 3, Fig. 4, Fig. 5.
Do not install the appliance behind a decoration or a furniture cover. This would
pose a risk due to overheating.
Cutting operations on the furniture shall be performed before the installation of the
appliance. Remove any burrs. They may have an adverse effect on the functioning
of electrical units.
Use protective gloves to prevent injuries.
You shall provide the shaded areas shown in the drawings for ventilation and
cooling inside the cabinet or cupboard to ensure correct operation of the appliance
(Fig. 3).
The connection outlet of the appliance shall be inside the shaded area shown or it
shall be out the installation area (Fig. 3).
Surfaces on the furnitures where the appliance is built-in shall withstand tempera-
tures up to 120 ºC.
A support that may handle the weight of the oven shall be put under it while
placing the oven.
For safety reasons, direct contact of the appliance with electrical parts shall be
prevented when the installation is complete.
Parts that provide insulation and protection shall be installed so that they cannot
be removed by using any tool.
We recommended you to install the appliance in a wall cabinet to ensure a more
efficient air circulation.
Rear compartment of the cabinet in the kitchen unit shall be removed to ensure a
more efficient air circulation.
We recommended you to provide a minimum clearance of 70 mm from the rear of
the kitchen unit where the appliance is installed.
We do not recommend installation of the appliance near a refrigerator or deep
freezer. Otherwise, the performance of such appliances shall be affected
adversely due to the dissipated heat.
To make your oven ready for operation, have the location it shall be placed in built
with the electrical installation. Then, call the Authorized Service.
24.12.2021
15
OVEN USER GUIDE EN