Kenmore 795.7160 Manual De Uso Y Cuidado página 14

2. Replacing Refrigerator Door
Left Door
• Lower the door onto the middle hinge pin (6).
• Make sure the door is aligned with the
cabinet.
• Replace the top hinge (5) by rotating the lever
hinge (4) clockwise to secure it.
• Make sure the gasket on the door is flush
against the cabinet and is not folded.
• Support the door on the handle side while
securing. Make sure the door is straight and
the gap between the doors is even across the
front.
• Install the ground screw (3) and connect the
wire harness (2).
• Tighten the cover screw (1).
Right Door
• Lower the door onto the middle hinge pin (6).
• Replace the top hinge (3) by rotating the
lever hinge (2) counterclockwise to secure it.
• Tighten the cover screw (1).
NOTE: Make sure that the washers [part (7)]
are in place on the middle hinges before
installing the doors.
REFRIGERATOR INSTALLATION
14
6
7
6
7