JouSecu 2AV29-B155PU Manual De Instrucciones página 4

Setup and use your video baby monitor
Installing Baby Unit
1) Connect the small plug of power adapter to
the Baby Unit and push the Micro USB plug to
the end. Only use the enclosed adapter
(DC 1000mA). You will see green LED is
turned on.
Baby Unit is already paired with Parent Unit without using the pairing button. If
you need to add more cameras in the future, you can use this button to add.
Please refer to page 14 < Add more cameras>.
2) Place the Baby Unit on a flat
surface, such as a desk or
shelf, or mount the camera
on a wall.
3) Connect the small plug of power adapter to Parent Unit and push the
connector to the end. Only use the enclosed adapter (DC 2000mA).
Recommend charging time of at least 3 hours before first use.
3