Descargar Imprimir esta página

WaterTech MC-1 Guía De Usuario página 50

Publicidad

Idiomas disponibles

Idiomas disponibles

MC-1 FILTER SYSTEM
• For Chemical and Mechanical Reduction.
• Systems certified for cyst reduction may be used on disinfected waters that may contain
filterable cysts.
• Recommended replacement schedule for the carbon filter is 500 gallons / 1892 liters or
180 days, whichever comes first.
• This system is not intended to convert wastewater or raw sewage into drinking water.
• Conforms to NSF/ANSI for VOC and pentavalent arsenic reduction. See performance data
sheet and Arsenic Facts section for an explanation of reduction performance.
• The MC-1 Filter System is certified by IAPMO R&T against NSF P231 – Microbiological
Water Purifiers, based on the recommendations set forth in the USEPA Guide Standard
and Protocol for Microbiological Water Purifiers (OPP Task Force Report, 1987).
NSF/ANSI
42, 53, 401, P231
For cold water use only
Max. Temp: 100° F / 38°C
Min. Temp: 40° F / 4°C
Min/Max. Pressure: 20-100 psi
Flow Rate @ 50 PSI: 0.75 gpm
Capacity: 1892 liters (500 gallons)
50
This System has been Certified by IAPMO R&T against NSF/ANSI
Standards 42, 53, 401 & P231 as verified and substantiated by test data
listed in the Performance Data Sheet and at www.iapmo.org.
For Replacement Filter & Parts contact:
WaterTech
800 Freeport Pkwy, #150
Coppell, TX 75019
+1 469-521-1180
www.WaterTechFilters.com
Replacement filter: MC-1FX
EPA Est. 92705-CA-1

Publicidad

loading