Nevir NVR-5625NVSD Manual De Instrucciones página 17

Display of normal running
On the occurrence of a failure, the corresponding icons will give a combined blink：
the error codes and types are shown as follows:
Refrigerator:
Error Code Error Description
Temperature sensor of Refrigerator room fail
E1
Defrosting sensor of
E5
E6 Communication error
Ambient temperature sensor fail
E7
If no failure, the screen displays the setting temperature of the refrigerator room.
Standby function
Long press the standby button
Temperature setting
The temperature setting will be changed once you press button(
will run according to the new temperature setting after 15s.
Set�ng 1
Set�ng 2
Super cool mode
Enter: under refrigerator mode,
During Super cool mode, the refrigerator runs according to the temperatures set at
this mode automatically after running for 360 minutes or temperature setting or mode setting.
Refrigerator room fail
for 10 seconds to set the standby function.
Set�ng 4
Set�ng 3
press the button(
15
Display
Icon " " & Icon" " shine at same �me
Icon " " & Icon" " shine at same �me
Icon " " & Icon" " shine at same �me
Icon " " & Icon" " shine at same �me
). Then, the refrigerator
Set�ng 5
) until the icon lighten
2℃,and it will exit
CE:
Set�ng 6
三＠e