Optional Connections; Connecting To A Computer - Trevi KIDTAB 7 S02 Manual Del Usuario

When Wi-Fi is on, the tablet will look for and display a list of available Wi-Fi networks.
Note: If a network that you have connected to previously is found, the tablet will connect
to it.If you don't see your network in the list, you can force the tablet to re-scan. To scan
for networks, tap the Menu key, and then touch Scan.
2. Select an available Wi-Fi network to connect To:
In the same Wi-Fi settings menu above,touch a network in the list.
If the network is open,the tablet will prompt you to confirm connection to the network.
Touch Connect to confirm.
If the network is secured (as indicated by a Lock icon),the tablet will prompt you to enter a
password or other credentials.Touch the Wireless password box to show the on-screen
keyboard and then use it to enter the password. Touch Connect to confirm.
When you have successfully connected to a Wi-Fi network, the Notifications bar at the the low
of the screen will show a Wi-Fi signal indicator.
Note: To learn about how to add a Wi-Fi network when it is not in range or when the router
is set to obscure the network name (SSID); or to configure advanced Wi-Fi options, please
refer to the manual.

OPTIONAL CONNECTIONS

Connecting to a Computer

Connect the tablet to a computer to transfer files.
1. Connect your tablet to the computer.
With the included USB cable: Plug the small end of the cable into the USB 2.0 high speed
connector of the tablet. Plug the large end of the cable into an available USB 2.0 high speed port
on the computer.
2. When your tablet is connected, on PC open "My Computer" will appear under "Portable
devices" "KIDTAB 7 S02".
28