Publicidad
Idiomas disponibles
Idiomas disponibles
4. Setting 2nd limit
4.1
4.2
1"
Move until reach
Press SET in RC
the desired height
for 1 sec.
Intermediate positions setting (optional)
The time between operations must be lower than 10 seconds or the motor will leave the setting mode
5. Intermediate positions setting (maximum 4)
5.1
5.2
1"
Move to the
Press SET in RC
INTERMEDIATE
for 1 sec.
POSITION desired
6. Deleting intermediate postions (also valid for 2nd limit)
6.1
6.2
7"
Move to the
Press SET in RC
INTERMEDIATE
for 7 sec.
POSITION you
want to delete
Additional functions
The time between operations must be lower than 10 seconds or the motor will leave the setting mode
7. Limit / intermediate postion fine tuning
7.1
7.2
1"
Move to the LIMIT
Press SET in RC
or POSITION you
for 1 sec.
want to adjust
8. Change between "Pulse mode" and "Continuous mode"
8.1
8.2
5"
Press STOP for
Motor will turn
5 sec.
slightly
9. Adding a new remote control / channel from one programmed
9.1
9.2
5"
Press STOP for
Motor will turn
5 sec.
slightly
www.neroxdomo.com
4.3
4.4
1"
Motor will turn
Press SET in RC
slightly
for 1 sec.
Only in "Continuous mode"
5.3
5.4
1"
Motor will turn
Press SET in RC
slightly
for 1 sec.
6.3
1"
7"
Motor will turn
Motor will turn
slightly after 1 sec.
slightly after 7 sec.
7.3
7.4
Motor will turn
Move until reach
slightly
the desired position
8.3
8.4
Press STOP once
Motor will turn
slightly
9.3
NUEVO
9.4
Press UP once in
Motor will turn
the new REMOTE /
slightly
CHANNEL
4.5
4.6
Motor will turn
2nd LIMIT
slightly
programmed
5.5
5.6
Motor will turn
POSITION
slightly
programmed
6.4
POSITION
deleted
7.5
7.6
1"
Press SET in RC
Motor will turn
for 1 sec.
slightly
Only is possible if the Upper and Lower Limits are programmed
8.5
MODE changed
9.5
new REMOTE /
CHANNEL added
8 13
/
COMPACT
35
installation manual
7.7
NEW POSITION
adjusted
5 YEARS WARRANTY
ENG
Publicidad
