Taurus Alpatec R403 Manual De Instrucciones página 7

- If you wish to use the cool/humidification
function, ensure there is sufficient water in the
reservoir.
- Fill the tank to the rear with cold water and insert
if you want the ice boxes.
- Take into account the indication of the water
level. Do no exceed the level MAX.
- Extend the cable completely before plugging
it in.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using the speed
buttons (C)
- Turn the cooler on, by using the cooler button
(A)
FAN FUNCTION:
- Select the desired ventilation speed. (C )
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, press the (D) switch.
- To deactivate this function, follow the
procedure for switching it on in reverse.
REFRESH FUNCTION:
- To activate this function, press the (A)
button. - To deactivate this function, follow the
procedure for switching it on in reverse.
- Do not activate this function if there is no water
in the tank, or if the water level is below the
minimum.
- To cool the air, add the ice packs in the water
tanks (5,7)
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off using the on/off switch
(A, B).
- Unplug the appliance from the mains.
- Put the cable back in the cable housing.
- The cable housing means you can remove and
have available the required length of cable for
working with the appliance, preventing accident
risk situations.
- Empty the water tank.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the upper
part of the body, which facilitates comfortable
transportation .
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Wash the filter in warm water with a mild, soapy
solution; use a soft brush if necessary. Rinse
with clean water and leave to dry.
- Wash the honeycomb filter with clean water and
a soft brush if necessary. Leave to dry.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
- At the end of the season, store the cleaned
and dried appliance in the original packaging if
possible. Store it upright in a cool, dry and dust-
free place.