PULOX PLW-100 Manual De Instrucciones página 10

4. If you want to display the measurement result permanently, press the HOLD
button.
5. Empty the measuring spoon.
6. Before the new measurement, press the HOLD button.
Add weights
Several individual measurements can be added (each individual measurement up to
a maximum of 300g). It is not possible to change the unit of measure while adding.
1. Turn on the spoon scale and take a measurement.
2. Press the Σ/UNIT button. The measurement result and Σ are shown in the
display.
3. Empty and refill the measuring spoon. The total weight of both quantities is now
shown on the display.
4. Steps 2 and 3 can be repeated until a total weight of 3 Kg is reached. If the total
weight is exceeded, the error message „O_LD" appears.
Tare/Zero position
1. If 0 is not displayed after switching on, press "TARE" and the spoon scale
switches to the zero position. Now you can weigh the food in the spoon.
2. If you want to weigh food with a container, put the empty container into
the spoon first. The spoon scale shows the weight of the container. Now
press "TARE" and the spoon scale will show 0. Now you can weigh the
weight of the food inside and the spoon scale will show you the net
weight.
3. Press "TARE" again once you have removed the container and the scale
will return to normal mode.
Error messages
Display Error Description
There is more than 30g weight in the measuring spoon when switched
on.
9
EN