Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY & INSTALLATION
BEFORE USING YOUR APPLIANCE
• Remove the exterior and interior packaging.
• Before plugging in the fridge, let it stand upright for approximately 24
hours. Doing this will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Install the door handle (see detailed instructions below)
INSTALLING THE STAINLESS STEEL DOOR HANDLE
To install the door handle, follow the instructions below:
1. Use a Phillips screwdriver to remove the screws found in the door frame
and replace them with the fix screws.
2. Align the set screws with the fix screws and lock the set screws into place.
3. Place the handle holes over the fix screws and tighten the set screws using
the hex wrench.
4. Make sure the handle is secured tightly. If the handle holes do not go all
the way over the fix screws, position the set screws farther out from the fix
screws.
www.newair.com
EN
14
Publicidad
