Maintenance And Storage - Kerbl topTemp Instrucciones De Uso

Maintenance and Storage

The unit is not waterproof / water resistance and never submerge into water or
other form of liquid. You may use moistened cotton or alcohol swab with 70 %
isopropyl in wiping the tip and probe before or after use. While only use a soft dry
cloth in cleaning the plastic body casing. The following helpful tips will enable you
to maintain and secure optimum result, as well prolong the life of the unit.
1. Always remove the battery from the unit when not to be used in long time and
store the unit in a room temperature
2. Do not expose the unit to a direct sunlight or high temperature and humidity.
3. Do not drop the unit as it is not a shock proof and may cause damage with
electronic parts.
4. Keep out the unit from the reach of children.
5. Use the unit per illustrated and indicated instructions with this manual.
6. Keep a distance away from any electro magnetic transmitters or appliances that
may cause disturbance, as well inaccurate measurement of the unit.
7. The unit is fully calibrated and has been carefully tested.
8. In case of malfunctions, refrain from doing any repair and bring the unit back to
where it´s purchased or only to authorized agent.
Removing and Installing the Batteries
Please refer to hereunder illustrations and follow the instructions.
a. Press the snap and slide down the battery cover from the unit.
b. With only a little pressure, remove the batteries from the compartment.
c. With emphasis for the right polarity indicated in the battery compartment, install
a new set of batteries.
d. Slide back gently the battery cover.
e. Only use the right type of battery, which is of AAA size x 2 pieces.
f. Replace all batteries whenever almost exhausted or symbol shows on
the LCD window.
g. Discarded batteries should be disposed properly.
12