Levolor Real Wood Instalación página 8

INSTALLATION
INSIDE MOUNT (IM)
Box bracket
STEP 1: MARKING THE BRACKET LOCATIONS
•
Position the box brackets at each end of the headrail to confirm the dimension.
Depending on installation location, box brackets can be attached using the top,
back, or the side holes.
•
Position the center support bracket (if included) in the center, if using only one.
If more than one center support bracket is included, space them evenly along
the headrail.
•
Mark the location of the desired bracket mounting holes, two per bracket, making
sure they are square and equally spaced.
Center support
bracket(s)
(if included)
STEP 2: INSTALLING THE BRACKETS
•
Drill pilot holes using a
installation location, box brackets can be attached using the top, back, or side holes.
•
While holding the brackets in place, secure the brackets using two screws per bracket.
•
Ensure all brackets are square with each other.
8
Motorized Tilt Operation
Center support
bracket(s)
(if included)
Box bracket
OR
Screws
(2 per bracket)
⁄ " drill bit using pencil marks as a guide. Depending on the
1
16
Box
Screws
bracket
(2 per bracket)
Home