Costway AU10008 Instrucciones De Montaje página 6

6. Assemble the remaining three
support legs(4) to the seat
cushion base and hand tighten.
(Fig. 7)
7. Tighten all screws. (Fig. 8)
8. Put the Seat cushion(1) into the
seat cushion base. (Fig .9)
10
Figure 7
Figure 8
Figure 9
9. Assemble the castors with M8
cap nut(9), flat washer(10), spring
washer(11). Repeat for all castors.
(Fig. 11)
10. Put the can holder to the side
of underseat storage base. (Fig.
12)
11. Your workshop creeper seat is
now ready for use. Periodically
check to ensure all bolts are tight
on your workshop creeper seat.
Figure 11
Figure 12
Figure 13
11