Publicidad
Idiomas disponibles
Idiomas disponibles
EXPERT Auto Tilt
280 / 320 / 2 × 3 / 220 × 140
Assembly instructions and
user manual
Carefully read through the
complete assembly instruc-
tions and user manual, par-
ticularly the safety instructions. Failure to
heed these safety instructions may result
in severe injury or damage to the sun
shade. Store the assembly instructions
and user manual for future reference and
always include them when passing the
sun shade on to third parties.
Your safety
Please observe the following
safety instructions. The manu-
facturer is not liable for damage
as the result of failure to comply.
Only use the sun shade with sufficient
ballasting (see Technical data).
Always place the sun shade on a firm
and level surface.
Use a stable support foot for the sun shade.
The sun shade should only be erected by
a competent adult.
When opening and closing the sun
shade, please make sure to keep your
hands outside of the folding mechanism.
In the case of approaching wind or storm,
close the sun shade and secure with a tie
strap. Otherwise, it could be caught by a
gust and overturned and inflict damage in
the process or sustain damage as a result.
Never ignite an open fire in the vicinity of
or underneath the sun shade. The sun
shade may catch fire or be damaged by
airborne sparks.
The sun shade is not a children's toy.
Children could trap their fingers. Also,
the sun shade is heavy and could injure
children if it tips over.
Do not hang anything on the lateral brac-
es of the sun shade or even use them for
chin-ups.
The sun shade can protect your skin
from direct UV radiation, but not from re-
flected UV rays. For this reason, please
also use a cosmetic sun block.
In order to protect the sun shade from ex-
cessive strain, close the sun shade in the
event of rain or snow and secure it with
a tie strap.
The cover is not suitable for machine
washing, dry cleaning or bleaching.
Do not use aggressive chemical cleaning
agents or fluids, solvents, abrasive sub-
stances or objects, bleaching agents,
high-pressure cleaners or strong clean-
ing products.
Please note the information on the care
label sewn into the sun shade.
Intended use
The sun shade is suitable for providing
protection against direct UV radiation.
It is not intended to provide protection
against rain or snow.
The sun shade is intended for domestic
use only. If used for commercial purpos-
es, the guarantee becomes void.
Setting up the shade
The following sun shade base must be
used to secure the sun shade. For model
280
85897AGT
320
85897AXT
2 × 3
85897AXT
220 × 140
85897AMT
1. Place the sun shade base in the de-
sired location.
2. If you have not yet done so, screw the
shade tip onto the threading (see fig-
ure A).
3. Loosen the knob 1 by turning it
counterclockwise.
4. Let the shade mast 2 at least 10 cm
into the bottom pole 3 (see figure B).
5. Tighten the knob 1 by turning it
clockwise.
GB
50 kg
70 kg
70 kg
40 kg
9
Publicidad
