The primary plug is interchangeable. This allows a world wide use. The procedure of changing the plugs is as per
the pictures.
To prevent mechanical and electrical breakdown, never install or store the charger in the following areas:
- areas exposed to high moisture or condensation
- areas exposed to extreme environmental conditions
- areas subject to constant vibrations
- areas subject to severe temperature fluctuations
- outdoors
Installation
Do not place the NT300 on soft furniture, cloth or carpet.
Do not insert any objects in any opening in the housing.
The HEINE Charger is intended for installation in medical areas outside the patient environment
(at least 1.5 metres from the patient or patient support pursuant to IEC 60601-1, see figure).
Installation, operation and use
The HEINE NT300 is compatible with the following rechargeable handles:
- BETA L rechargeable handle
- BETA NT rechargeable handle
- BETA Slim rechargeable handle
- Standard F.O. laryngoscope handle
- Short F.O. laryngoscope handle
- F.O. angled handle
- Small F.O. laryngoscope handle
8/52
MED 0613
2020-06-26