Descargar Imprimir esta página

Senix BLV4QL-M Manual Del Operador página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

STARTING / STOPPING THE BLOWER
STARTING INSTRUCTIONS
CAUTION:
Operate this unit only in a well-ventilated outdoor area.
Carbon monoxide exhaust fumes can be lethal in a
avoid serious injury, the operator and the unit must be in
a stable position when pulling the starter rope.
CAUTION:
people, animals, windows, automobiles or loose debris.
Be sure to read the fuel information in the safety rules
before you begin. If you do not understand the safety
rules, do not attempt to fuel your unit.
3. Slowly press and release the primer bulb 10 times
(Fig. 10).
(Fig. 10 ).
starting position (Fig. 11).
rope with a controlled and steady motion 3 to 5 times to
start the engine (Fig. 11).
7. Allow the engine to warm up less than 10 seconds,
Note: There is no need to turn the unit on. The On/Off
switch is in the ON ( I ) position at all times (Fig. 9).
STOPPING INSTRUCTIONS
CAUTION:
Clear the area of children bystanders, and pets. At a
should be encouraged to wear eye protection. If you are
approached, stop the engine.
1. Release the throttle control and allow the engine to
idle.
2. Press and hold the On/Off switch in the OFF (STOP)
position until the engine comes to a complete stop.
Fig. 9
10
Fig. 10
Fig. 11
OPERATING TIPS
CAUTION:
While vacuuming or blowing debris, hold the unit with the
rotating parts, stop the engine before installing or
removing attachments. Do not operate without guard(s)
in place.
not early in the morning or late at night when people
might be disturbed. Comply with times listed in local
ordinances. Usual recommendations are 9:00 a.m. to
5:00 p.m., Monday through Saturday.
lowest possible throttle speed to do the job.
water is available.
hoses for many lawn and garden applications, including
areas such as gutters, screens, patios, grills, porches,
and gardens.
OPERATION
WWW.SENIXTOOLS.COM

Publicidad

loading