Trevi RC 820 Guía De Usuario página 4

ENGLISH
1. Band selector switch
2. Hour set button
3. Minute set button
4. Alarm set off button
5. Dial scale
6. Sleep button
POWER SUPPLY
This unit is designed to operate from AC
230V /50Hz household mains supply. The
9V type 6LR61 battery is used for clock
back-up only.
RADIO OPERATION
1. To turn on, slide the Function switch (11)
to the ''ON'' position.
2. Slide the Band selector switch (1) to the
FM, AM position.
3. Adjust the Volume control (10) to the
desired volume level.
4. Turn the Tuning control (7) to the
frequency of the desired station.
5. To turn the radio off, slide the Function
switch (11) to the ''OFF'' position.
CLOCK SETTING
1. To set the hours, press the Hour set
button (2) until the desired hour is
displayed.
Release both buttons.
2. To set the minutes, press the Minutes set
button (3) until the correct time appears
on the display (8).Release both buttons.
WAKE TO RADIO OR BUZZER
1. Select the desired radio station and
volume level.
2. Hold the Alarm set/off button (4) down
and press the Hour set button (2) to set
the desired alarm hour, and hold the
Alarm set/off button (4) and press the
Minute set button (3) to your desired
minute setting.
3. Slide the Function switch (11) to the
''AUTO'' position. The alarm function is
activated and the alarm indicator (12)
will light up. The radio will then turn on
to wake yon up at the preset time.
4. To wake to buzzer instead of radio, make
sure to turn the Volume control (10) off.
5. To turn the radio or buzzer off slide the
Function switch (11) to the ''OFF''
position or press the Alarm set/off
button (4).
_4
7. Tuning control
8. Digital display
9. Snooze button
10.Volume control
11.Function control
12.Alarm indicator
SNOOZE REPEAT ALARM
1. When the buzzer sounds or the radio
turns on, pressing the Snooze button (9)
will turn off the buzzer or radio
temporarily. Approximately 9 minutes
later, the buzzer or radio will turn on again.
2. To cancel the snooze operation, slide the
Function switch (11) to the ''OFF''
position or press the Alarm set/off
button (4).
SLEEP TO RADIO
1. Select the desired radio station.
2. Slide the Function switch (11) to the
''AUTO'' or ''OFF'' position.
3. Press the Sleep button (6) and the clock
display will show 59 minutes as the
default sleep period. The sleep period
can be reduced as desired by pressing
the minute set button (3)while holding
the Sleep button(6)down.
4. The sleep period can also be set up to
1hour 59 minutes by pressing the
Hour set button(2)once while holding
the sleep button(6)down.
5. The radio will play for the desired period
and then turn itself off automatically.
6. To turn the radio off prior to the end of
the preset period, simply press the
Snooze button (9) once.
SLEEP AND WAKE TO RADIO
1. Select your desired radio station.
2. Slide the Function switch (11) to the
''AUTO'' Position.
3. Set the desired wake-up time as
described above.
4. Press the Sleep button (6) and set the
desired sleep period.
RC 820