Publicidad
Idiomas disponibles
Idiomas disponibles
USE:
- Extend the cable completely before plugging
it in.
- Connect the appliance to the mains.
- The pilot light comes on in red color.
- Leave to heat up for a few Minutes.
- Wait until the pilot light change to green will
indicate that the appliance has reached an
adequate temperature.
- During the appliance's use the pilot light will
come on and off automatically, indicating the
heating elements are working, and therefore
maintaining the desired temperature.
- Push the Steam button to start working
- Orient the appliance to direct the steam flow
in the desired direction
STEAM GARMENT:
- The steam garment is easy to use and is
perfect for removing wrinkles/creases from
garments and curtains as well as refreshing
furnishings fabrics.
- It can be used on most fabric as long as
the fabric is hanging or where the garment
steamer can be easily used in an upright
position moving over the fabric in an up and
down motion.
- NOTE: the garment steamer is designed to
be used in an upright position on hanging
garments, refrain from using the steamer in
or on garments in a horizontal position.
- Hang the garment from a hanger and stretch
the fabric slightly with one hand.
- Check that there is ventilation behind the
fabric.
- Check garment pockets are empty.
- NOTE: we recommend you do not steam
over metal accessories, use caution and
steam around the metal accessories.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Unplug the appliance from the mains.
- Remove the water from the water tank.
- Let the product cool down
- Clean the appliance.
ASSEMBLE THE ACCESSORIES (FIG 2)
- Attention: Always let the steamer cool
down before assembling or removing the
attachments.
- Assembly of fabric brush:
- 1 Align the bottom protruding part of the
fabric brush into the bottom groove of the
steam head.
- 2 Push the head of the fabric brush until
the top protruding part also clicks in the top
groove of the steam head.
HANDLE FOLDING (FIG 3)
- This machine is with well-designed handle
folding function, the handle can be folded,
stretchable, convenient collection and travel.
- Fold: Slide the button down to the bottom,
then fold forward, press the handle to the
bottom and fold:
- Stretch: Stretch the handle backward, lock
button "click", stretch is done.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which
protects the appliance from overheating.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately
15 minutes before reconnecting. If the
machine does not start again seek authorised
technical assistance.
DECALCIFICATION
- If the appliance begins to begins to produce
steam more slowly than, or stops producing
steam and then starts again, you may need to
decalcify your steamer. Decalcification refers
to removing the calcium deposits that form
over time on the metal parts of the steamer.
For best performance from the Garment
Steamer, please decalcify the unit from time
to time. The frequency depends upon the
hardness of the water being used and how
often you use the steamer.
- Method:
- 1.To decalcify, use a solution of 1/3 white
vinegar 2/3 water in the water tank.
- 2.Plug the unit into electrical outlet. Wait
until the red light goes off then push the
steam button, and run until all amount has
steamed. Release the steam button, unplug
from electrical outlet, and allow to cool for 30
minutes.
- Repeat the above procedure as many
times as necessary until a normal steam
rate returns, usually 2 to 3 times. With each
repeated cycle, use a fresh solution of
EN
Publicidad
