Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY ADVICES
Depending on the internal impedance of the voltage
detector there will be a different capability of
indicating the presence or absence of operating
voltage in case of the presence of interference
voltage.
When in contact with the parts to be tested, the
voltage detector may discharge temporar-ily the
interference voltage to a level below the ELV, but it
will be back to the original value when the voltage
detector is removed.
When the indication "voltage present" does not
appear, it is highly recommended installing earthing
equipment before work.
When the indication "voltage present" appears on a
part that is expected to be disconnected of the
installation, it is highly recommended confirming by
another means (e.g. use of an adequate voltage
detector, visual check of the disconnecting point of
the electric circuit, etc.) that there is no operating
voltage on the part to be tested and to conclude that
the voltage indicated by the voltage detector is an
interference voltage.
2. Symbols and Features
Symbols as marked on the Tester and
Instruction manual
Risk of electric shock
See instruction manual
!
+ or -
+ DC or –DC measurement
Equipment protected by double or
reinforced insulation
Battery
Earth
AC measurement
Conforms to EU directives
High Voltage Detection
ELV Indication
Continuity
Phase indicator see "Phase Rotation Test"
section for more Information.
2
EN
Publicidad
