Connecting The Components - Canon VC-C50i Manual De Instrucciones

Before You Use the Product
Using the Wide-angle Converter
The optional Wide-angle Converter WL-37 can be used to provide wide-angle shots (approx.
0.74× the normal focal distance).
Mount the wide-angle converter correctly so that it is level and fitted securely onto the
camera. When mounted correctly, the wide-angle converter should turn roughly 3 times before
stopping.
a
WARNING
The Wide-angle Converter WL-37 cannot be used on the VC-C50iR. If the converter
is used on the VC-C50iR, the mount will gradually loosen and the converter will fall off
the camera.
● The camera may not operate correctly if a wide-angle converter other than
● If you use the optional Wide-angle Converter WL-37, set the zoom lens to the
NOTE
● The permissible range of camera installation angles with the wide-angle
● The wide-angle converter cannot be used in night mode. (→ P.33)

Connecting the Components

AC cable
AC Adapter
14
Wide-angle Converter
the WL-37 is used.
wide-angle end. If you set the zoom lens to the telephoto end, the image
resolution will be affected and the autofocus might have problems.
converter mounted on the camera is ±15° from the horizontal.
DC IN 13V VIDEO OUT
BNC connector
(Rear of camera)
B1 B10
A1 A10
Multiconnector plug
To VIDEO IN terminal
• PC
• Another
VC-C50i/
VC-C50iR
• Network
camera server
• Sensor
• Alarm
• Monitor
Monitor