Useful Functions For Ipod; Link Play Mode - Pioneer FH-X775BT Manual De Instrucciones

CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected
directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable
supplied with the device. However, depending on the connected device and the numbers of the files in
the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is
not compatible with WAV file formats, and cannot be used with the MIXTRAX function.
AUX
1
Insert the stereo mini plug into the AUX input jack.
2
Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 15).
Operations
You can make various adjustments in the FUNCTION settings (page 13).
Note that the following operations do not work for an AUX device. To operate an AUX
device, use the device itself.
Purpose
Select a folder/album*1
Select a track/song (chapter)
Fast forward or reverse
Search for a file from a list
View a list of the files in the selected folder/
category*1
Play a song in the selected folder/
category*1
8
En
Operation
Press 1/ or 2/ .
Press or .
Press and hold or .
1 Press
to display the list.
2 Turn the M.C. dial to select the desired
file (folder) name or category, then press
to confirm.
3 Turn the M.C. dial to select the desired
file, then press to confirm.
Playback starts.
Press the M.C. dial when a folder/category
is selected.
Press and hold the M.C. dial when a folder/
category is selected.
Purpose
Alphabetical search (iPod only)
Repeat play
Random/shuffle play
Shuffle all play (iPod only)
Pause/resume playback
Sound retriever*2*3
Return to root folder (USB only)*1
Switch between compressed audio and CD-
DA (CD only)
Change drives in USB device
(Devices that support the USB mass storage
device class protocol only)
*1 Compressed audio files only
*2 This function is disabled when USB is selected as a source and the MIXTRAX function is on.
*3 When there is no 3/S.Rtrv. button on the unit, the sound retriever function can be set by the
FUNCTION settings.

Useful functions for iPod

Link play mode

You can access songs based on the artist, album, or genre currently playing.
1
While listening to a song, press and hold
2
Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to
confirm.
The selected song/album will be played after the currently playing song.
Operation
1 Press
to display the list.
2 Turn the M.C. dial to select the desired
category list, then press to enter the
alphabetical search mode.
(Turning the M.C. dial twice also enters
the alphabetical search mode.)
3 Turn the M.C. dial to select a letter, then
press to display the alphabetical list.
To cancel alphabetical search, press
DIMMER.
Press 6/ .
Press 5/ .
Press and hold 5/ .
Press 4/PAUSE.
Press 3/S.Rtrv.
[1]: Effective for low compression rates
[2]: Effective for high compression rates
Press and hold BAND/ .
Press BAND/ .
Press BAND/ .
to enter the link play mode.
/